|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APL431L Low Voltage Adjustable Precision Shunt Regulator Features * * * * * * * * * Precise Reference Voltage to 1.24V Guaranteed 0.5% or 1% Reference Voltage Tolerance Sink Current Capability, 80uA to 100mA Quick Turn-on Adjustable Output Voltage, VO = VREF to 20V Low Operational Cathode Current, 80A Typical 0.1 Typical Output Impedance SOT-23-3, SOT-23-5, TO-92 and SOT-89 Packages Lead Free Available (RoHS Compliant) General Description The APL431L is a 3-terminal low voltage adjustable precision reference with specified thermal stability over applicable commercial temperature ranges. Output voltage may be set to any value between Vref (1. 24 V) and 20 V with two external resistors (see Figure 2). When used with an photocoupler, the APL431L is an ideal voltage reference in isolated feedback circuits for 3V to 12V switching-mode power supplies. This device has a typical output impedance of 0.1. Active output circuitry provides a very sharp turn-on characteristic, making the APL431L excellent replacements for zener diodes in many applications, including on-board regulation and adjustable power supplies. ANODE NC NC 3 1 2 5 1 2 4 3 Applications * * * Linear Regulators REF CATHODE REF ANO DE CATHO DE SOT-23-3 (Top View) 3 C ATHO D E SOT-23-5 (Top View) Adjustable Power Supply 2 AN OD E Switching Power Supply 1 R EF 1 2 3 REF ANODE CATHODE Symbol REF Anode Cathode TO-92 (Top View) SOT-89 (Top View) Functional Diagram C athode REF + _ Vref Anode ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 1 www.anpec.com.tw APL431L Ordering and Marking Information A P L 43 1 L Le ad F re e C ode H and ling C od e T e m p. R a nge P ac k a ge C od e E le c . G rad e E le c . G rad e A : 0 .5 % R e fe re nc e V oltage T oleran c e B : 1 % R efe re nce V oltage T oleranc e P ac k a ge C od e A : S O T -23 -3 B : S O T -23 -5 D : S O T -89 E : T O -9 2 Y :C hip F orm T e m p. R a nge C : 0 to 70 C I : -40 to 85 C H and ling C od e P B : P las tic B a g T B : T ape & B o x T R : T a pe & R ee l Le ad F re e C ode L : L e a d F re e D e vic e B la n k : O rig in a l D evic e A P L 431 L E : APL 43 1L X XX XX A P L 431 L A /B : 43 1L X XX XX - D ate C od e A P L 431 L D : A P L 431 L X XX XX X XX XX - D a te C od e Notes ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. Absolute Maximum Ratings Symbol VKA IK IREF JA Parameter Cathode voltage Continuous cathode current range Reference current range Thermal Resistance from Junction to Ambient in Free Air SOT-23-3 SOT-23-5 SOT-89 TO-92 Operating Junction Temperature Range Storage Temperature Range Lead temperature range, Ts (Soldering, 10sec) Rating 20 100 3 416 357 250 250 -40 to 150 -65 to 150 260 Unit V mA mA C/W TJ TSTG TSOL C C C Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 2 www.anpec.com.tw APL431L Electrical Characteristics Symbol Parameter TA= 25C ( unless otherwise noted) Test Conditions Unit VREF Reference voltage VDEF VDEF Temp Deviation APL431L Min. Typ. Max. APL431LA 1.234 1.240 1.246 VKA=VREF, IK=10mA TA =25C, (Fig. 1) APL431LB 1.228 1.240 1.252 APL431LA 1.222 1.240 1.258 TA =full range(see Note1), (Fig.1) APL431LB 1.215 1.240 1.265 TA =full range (see Note1) 5 15 VKA=VREF, IK=10mA (Fig. 1) -0.2 0.15 0.05 0.01 0.01 0.1 80 -1.0 0.5 0.3 0.1 0.5 0.4 100 V mV Ratio of Change in VREF IK=10mA, VKA=16V to VREF (Fig. VREF / VKA to Change in Cathods 2) Votage IREF Reference Input Current IK=10mA,R1 =10k,R2 = (Fig. 2) TK=full range (see Note 1), IREF(DEV) IREF Temp Deviation R1=10k, R2=, IK=10mA, (Fig. 2) VK=6V IK(off) off-state cathode current VREF=0V, (Fig. 3) VK=16V VKA=VREF , IK=1mA to 100mA, Dynamic Output ZKA Impedance f 1kHz (Fig. 1) Minimum Operating IK(MIN) VKA=VREF (Fig. 1) Current mV/V A A A A Notes : 1.Full temperature range is 0C to 70C for APL431LXXC,and -40C to 85C for APL431LXXl. Test Figures VIN IK VREF Vo VIN IK(off) Vo Figure 1. Test Circuit for VKA=VREF , VO=VKA=VREF Figure 3. Test Circuit for IK(off) Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 3 www.anpec.com.tw Figure 2. Test Circuit for V >V , APL431L Test Figures (Cont.) VIN IK R1 IREF VREF VREF R2 0.1 F Application Schematic Vo Precision Voltage Reference VIN RB Vo R1 R2 Figure 2. Test Circuit for VKA>VREF, VO= VKA= VREFx (1+R1/R2) + IREF x R1 Precision High-Current Series Regulator VIN RB R1 VREF 0.1 F R2 Vo Notes for Application Circuits: 1) To improve the stability of output voltage, a 0.1F capacitor between cathode and anode of APL431L is strongly recommended. 2)Set VOUT according to the following equation: VOUT = VREF(1+R1/R2)+lREF R1 3)Choose the value for RB as follows: A)The maximum limit for RB should be such that the cathode current(lK) is greater than the mini mum operating current (80A) at VIN(MIN). B)The minimum limit for RB should be such that the cathode current (lK) does not exceed 100mA under all load conditions, and the instantaneous turnon value for lk does not exceed 150mA. Both of the following conditions must. be met: VIN(MAX) RB,Min 150mA (to limit instantaneous turn-on lK) RB,Min VIN(MAX)-VOUT lOUT(MIN)+100mA (to limit lK under normal operating conditions) Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 4 www.anpec.com.tw APL431L Typical Characteristics Cathode Current vs. Cathode Voltage 250 200 100 Cathode Current vs. Cathode Voltage VKA=VREF TA=25C VKA=VREF TA=25C Cathode Current (A) Cathode Current (mA) -1 -0.5 0 0.5 1 1.5 150 100 50 0 -50 -100 -150 -200 -250 50 0 -50 -100 -1.5 -1 -0.5 0 0.5 1 1.5 Cathode Voltage (V) Cathode Voltage (V) Referemce Voltage vs. Junction Temperature 1.26 0.18 Reference Input Current vs. Junction Temperature Reference Input Current (A) IKA=10mA 0.16 IKA=10mA R1=10k, R2= Reference Voltage (V) 1.25 0.14 1.24 0.12 1.23 0.10 1.22 -50 -25 0 25 50 75 100 125 150 0.08 -50 -25 0 25 50 75 100 125 150 Junction Temperature (C) Junction Temperature (C) Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 5 www.anpec.com.tw APL431L Typical Characteristics Off State Cathode Current vs. Junction Temperature 0.5 VREF/VKA vs. Junction Temperature 0 Ratio of Delta Reference Voltage to Delta Cathode Voltage (-mV/V) -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1 -50 -25 0 25 50 VKA=VREF to 20V IKA=10mA Off State Cathode Current (A) VREF =0V VKA =16V 0.4 0.3 0.2 0.1 VKA =6V 0 75 100 125 150 -50 -25 0 25 50 75 100 125 150 Junction Temperature (C) Junction Temperature (C) IKA =1mA 3V TA =25C Input IKA =0.1mA 3V Input TA =25C 0 1V 0 Output 1V Output 0 0S 5 S 0 0 S 5S Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 6 www.anpec.com.tw APL431L Typical Characteristics Gain vs. Phase Shift vs. Frequency 60 0 Zka vs. Frequency 100 50 40 IKA=10mA TA =25C 50 100 150 200 250 300 350 Phase Shift (degree) 10 IKA=10mA VKA=VREF TA =25C Gain (dB) 30 Zka () 1 20 10 0 0.1 -10 10 100 1000 10000 100000 0.01 10 100 1000 10000 100000 1000000 1000000 Frequency (Hz) Frequency (Hz) Stability Boundary Conditions 100 90 80 70 Unstable VKA =VREF VKA =2.5V VKA =3.3V TA =25C Ik (mA) 60 50 40 30 20 10 0 0.0001 Stable 0.001 0.01 0.1 1 Load Capacitance (F) Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 7 www.anpec.com.tw APL431L Package Information SOT-23 D B 3 E 1 2 H e A A1 L C D im A A1 B C D E e H L M illim e t e rs M in . 1 .0 0 0 .0 0 0 .3 5 0 .1 0 2 .7 0 1 .4 0 1 .9 0 /2 .1 B S C 2 .4 0 0 .3 7 3 .0 0 0 .0 9 4 0 .0 1 5 M ax. 1 .3 0 0 .1 0 0 .5 1 0 .2 5 3 .1 0 1 .8 0 M in . 0 .0 3 9 0 .0 0 0 0 .0 1 4 0 .0 0 4 0 .1 0 6 0 .0 5 5 In c h e s M ax. 0 .0 5 1 0 .0 0 4 0 .0 2 0 0 .0 1 0 0 .1 2 2 0 .0 7 1 0 .0 7 5 /0 .0 8 3 B S C 0 .11 8 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 8 www.anpec.com.tw APL431L Package Information SOT-23-5 e1 5 4 E1 E 1 2 3 e b D A2 A a L1 A1 L2 L Dim A A1 A2 b D E E1 e e1 L L1 L2 N M illimeters M in. 0.95 0.05 0.90 0.30 2.8 2.6 1.5 0.95BSC 1.90BSC 0.35 0.20 BSC 0.5 5 0 10 0 0.7 0.020 0.55 0.014 M ax. 1.45 0.15 1.30 0.50 3.00 3.00 1.70 M in. 0.037 0.002 0.035 0.011 0.110 0.102 0.059 Inches M ax. 0.057 0.006 0.051 0.019 0.118 0.118 0.067 0.037BSC 0.074BSC 0.022 0.008 BSC 0.028 5 10 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 9 www.anpec.com.tw APL431L Package Information TO-92 3 J e e1 2 1 L1 Q E S D b2 b S A L SEATING PLANE Dim A b b2 D E e e1 J L L1 Q S Millimeters Min. Max. 4.318 5.334 0.406 0.406 4.445 3.175 2.413 1.143 3.429 12.70 1.27 2.921 2.032 2.667 0.559 0.559 5.207 4.191 2.667 1.397 Inches Min. 0.170 0.016 0.016 0.175 0.125 0.095 0.045 0.135 0.500 0.050 0 . 115 0.080 0.105 Max. 0.210 0.022 0.022 0.205 0.165 0.105 0.055 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 10 www.anpec.com.tw APL431L Package Information SOT-89 (Reference EIAJ ED-7500A Reg stration SC-62) D D1 a E H 1 2 3 L B1 B e e1 C A a D im A B B1 C D D1 e e1 E H L M illim eters M in. 1.40 0.40 0.35 0.35 4.40 1.35 1.50 B SC 3.00 B SC 2.29 3.75 0.80 2.60 4.25 1.20 10 0.090 0.148 0.031 M ax. 1.60 0.56 0.48 0.44 4.60 1.83 M in. 0.055 0.016 0.014 0.014 0.173 0.053 Inches M ax. 0.063 0.022 0.019 0.017 0.181 0.072 0.059 BSC 0.118 B SC 0.102 0.167 0.047 10 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 11 www.anpec.com.tw APL431L Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition TP (IR/Convection or VPR Reflow) tp Critical Zone T L to T P Ram p-up Temperature TL Tsm ax tL Tsm in Ram p-down ts Preheat 25 t 25 C to Peak Tim e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Pb-Free Assembly Large Body Small Body 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds 245 +0/-5C 250 +0/-5C 10-30 seconds 20-40 seconds Average ramp-up rate 3C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100C - Temperature Mix (Tsmax) 150C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5C 240 +0/-5C Time within 5C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6C/second max. 6 minutes max. Time 25C to Peak Temperature Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 12 6C/second max. 8 minutes max. www.anpec.com.tw Note: All temperatures refer to topside of the package. Measured on the body surface. APL431L Reliability Test Program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C, 5 SEC 1000 Hrs Bias @125C 168 Hrs, 100%RH, 121C -65C~150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Carrier Tape & Reel Dimensions t P P1 D Po E F W Bo Ao Ko D1 T2 J C A B T1 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 13 www.anpec.com.tw APL431L Carrier Tape & Reel Dimensions Application A 178 1 SOT-89 F B 70 2 D C 13.5 0.15 D1 1.5 0.1 C 12.0 D1 0.1MIN C J 3 0.15 Po 4.0 0.1 J T1 14 2 P1 2.0 0.1 T1 T2 1.3 0.3 Ao 4.8 0.1 T2 1.4 Ao 3.1 T2 1.5 0.3 Ao W 12 + 0.3 12 - 0.1 Bo 4.5 0.1 W 8.0+ 0.3 - 0.3 Bo 3.0 W 8.0 0.3 Bo P 8 0.1 Ko E 1.75 0.1 t 5.5 0.05 1.5 0.1 Application A 1781 SOT-23 F B 60 1.0 D 1.80 0.1 0.30.013 P 4.0 Ko 1.3 P 4 0.1 Ko E 1.75 t 0.20.03 E 1.75 0.1 t 2.5 0.15 9.0 0.5 Po 4.0 J P1 2.0 0.05 T1 8.4 2 P1 3.5 0.05 1.5 +0.1 Application A 178 1 SOT-23-5 F B 72 1.0 13.0 + 0.2 2.5 0.15 D D1 1.5 0.1 Po 4.0 0.1 3.5 0.05 1.5 0.1 2.0 0.1 3.15 0.1 3.2 0.1 1.4 0.1 0.20.033 Carrier Tape & Reel Dimensions H2 H2 H2A H2 D2 A W2 L L1 H3 H4 H W1 H1 W D T2 T T1 F1F2 P1 P P2 D1 Application A 3.18~12 H3 D 4.00.2 H4 D1 D2 0.36~0.53 9.0 MAX L L1 2.5 MIN W2 0.5 MAX F1,F2 2.5+0.2 -0.1 P 12.70.2 H 160.5 P1 6.350.4 H1 90.5 P2 H2 0.5 MAX T H2A 0.5 MAX T1 TO-92 27.0 MAX 20.0 MAX 11.0 MAX T2 W W1 5.0~7.0 50.80.5 0.55 MAX 1.42 MAX 0.36~0.68 17.5~19 (mm) Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 14 www.anpec.com.tw APL431L Cover Tape Dimensions Application SOT- 23 SOT-23-5 SOT- 89 TO-92 Carrier Width 8 8 12 17.5~19 Cover Tape Width 5.3 5.3 9.3 5.0~7.0 Devices Per Reel 3000 3000 1000 2000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. B.8 - Mar., 2005 15 www.anpec.com.tw |
Price & Availability of APL431L |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |